3.2.1.1. Alarms


The following alarms are supported by the handset:

  • Manual Alarm
  • Non Movement Alarm
  • Man Down Alarm
  • Time Alarm
  • Escape Alarm

General values are entered for all alarms. Furthermore, parameters are preconfigured for each alarm type, which can be adapted individually however for the corresponding application.


Information

Use PNG Mode for BGR 139-compliant operation and observe the settings prescribed there.

At least one automatic alarm has to be activated here in addition to the manual alarm.

It is not possible to switch off all alarms in PNG Mode.


General Settings

These values are used in general for all alarm types within an operating mode. 

Procedure:

  1. Select the Additional Features icon in the main menu.
  2. Select Configuration.
  3. Enter the five-position service PIN and confirm with OK.
  4. Select one of the three operating modes.
  5. Select Alarms.
  6. Select General Settings.
  7. Change the values of the following parameters:


Parameters

Basic mode

Alarm mode

PNG mode

Alarm number(s) / Alarm Destination

Alarm Destination 1 <empty>

-

-


Alarm Destination 2 <empty>

-

-


Alarm Destination 3 <empty>

-

-

Call retry counter

15

-

-

Calling Time

30 sec

-

-

Audio Channel

Hands-free

-

-


Manual alarm

You can configure all settings here for the manual alarm, in other words for the alarm triggered with the red alarm key.

Depending on how the red alarm key is pressed (SP: Short press, LP: Long press), different alarms are signaled (Alarm/PNG) and different alarm destinations are dialed (Basic).

Procedure:

  1. Select the Additional Features icon in the main menu.
  2. Select Alarm Configuration.
  3. Enter the five-position service PIN and confirm with OK.
  4. Select one of the three operating modes.
  5. Select Alarms.
  6. Select Manual Alarm.
  7. Change the values of the following parameters:

Parameters

Basic mode

Alarm mode

PNG mode

Short press Alarm Key

On

On

On

Long press Alarm Key

On

On

On

Keypad Locked

Key active

Key active

Key active

SP Pre-Alarm Time

0 sec.

<0-300 sec>

0 sec.

<0-300 sec>

0 sec.

<10-90 sec>

SP Pre-Alarm Ringtone

31 Alarm 5

31 Alarm 5

31 Alarm 5

SP Pre-Alarm Volume

50

50

50

SP Alarm Signal

On

On

On

SP Alarm Signal Ringtone

31 Alarm 5

31 Alarm 5

31 Alarm 5

SP Alarm Signal Volume

100

100

100

LP Pre-Alarm Time

0 sec.

<0-300 sec>

0 sec.

<0-300 sec>

0 sec.

<10-90 sec>

LP Pre-Alarm Ringtone

32 Alarm 6

32 Alarm 6

32 Alarm 6

LP Pre-Alarm Volume

50

50

50

LP Alarm Signal

On

On

On

LP Alarm Signal Ringtone

32 Alarm 6

32 Alarm 6

32 Alarm 6

LP Alarm Signal Volume

100

100

100


No-Motion Alarm

The No-Motion Alarm can be activated optionally. It is triggered if the sensors identify lack of movement over a defined configurable period of time.


Information

The response time and the pre-alarm time cannot be added, rather the pre-alarm time has to be deducted from the response time. For example, a response time of 90 s and pre-alarm time of 15 s means that the pre-alarm will be triggered after 75 s and the alarm after 90 s.


Procedure:

  1. Select the Additional Features icon in the main menu.
  2. Select Configuration.
  3. Enter the five-position service PIN and confirm with OK.
  4. Select one of the three operating modes.
  5. Select Alarms.
  6. Select No-Motion Alarm.
  7. Change the values of the following parameters:


Parameters

Basic mode

Alarm mode

PNG mode

Activation

On

On

On

Response Time

90 sec.

<10-900 sec>

90 sec.

<10-900 sec>

90 sec.

<10-90 sec>

Pre-alarm Time

15 sec.

<0-300 sec>

15 sec.

<0-300 sec>

15 sec.

<0-30 sec>

Sensitivity level

High

High

High


Man Down Alarm

The Man Down Alarm can be activated optionally. It is triggered if the sensors identify undue tilting of the handset over a defined configurable period of time (i.e. deviation from the vertical position).

Procedure:

  1. Select the Additional Features icon in the main menu.
  2. Select Configuration.
  3. Enter the five-position service PIN and confirm with OK.
  4. Select one of the three operating modes.
  5. Select Alarms.
  6. Select Man Down Alarm.
  7. Change the values of the following parameters:


Parameters

Basic mode

Alarm mode

PNG mode

Activation

On

On

On

Response Time

90 sec.

<10-900 sec>

90 sec.

<10-900 sec>

90 sec.

<10-90 sec>

Pre-alarm Time

15 sec.

<0-300 sec>

15 sec.

<0-300 sec>

15 sec.

<0-30 sec>

Sensitivity level

High

High

High


Time Alarm

The Time Alarm can be activated optionally. It is triggered if a timed alarm is not acknowledged in time by the user.

Procedure:

  1. Select the Additional Features icon in the main menu.
  2. Select Configuration.
  3. Enter the five-position service PIN and confirm with OK.
  4. Select one of the three operating modes.
  5. Select Alarms.
  6. Select Time Alarm.
  7. Change the values of the following parameters:


Parameters

Basic mode

Alarm mode

PNG mode

Activation

Off

Off

Off

Response Time

15 min.

<1-120 min.>

15 min.

<1-120 min.>

15 min.

<1-15 min.>

Pre-alarm Time

15 sec.

<0-300 sec>

15 sec.

<0-300 sec>

15 sec.

<0-15 sec>


Escape Alarm

The Escape Alarm can be activated optionally. It is triggered if the sensors identify undue violent movement of the handset over a defined configurable period of time.

Procedure:

  1. Select the Additional Features icon in the main menu.
  2. Select Configuration.
  3. Enter the five-position service PIN and confirm with OK.
  4. Select one of the three operating modes.
  5. Select Alarms.
  6. Select Escape Alarm.
  7. Change the values of the following parameters:


Parameters

Basic mode

Alarm mode

PNG mode

Activation

Off

Off

Off

Response Time

30 sec.

<10-900 sec>

30 sec.

<10-900 sec>

30 sec.

<10-90 sec>

Pre-alarm Time

15 sec.

<0-300 sec>

15 sec.

<0-300 sec>

15 sec.

<0-30 sec>

Sensitivity level

High

High

High


Alarm Signal

You can define the acoustic signaling of pre-alarms and alarms here. The following signals start quietly and reach their configured maximum value after a short time.

Procedure:

  1. Select the Additional Features icon in the main menu.
  2. Select Configuration.
  3. Enter the five-position service PIN and confirm with OK.
  4. Select one of the three operating modes.
  5. Select Alarms.
  6. Select Alarm Signal.
  7. Select Pre-Alarm or Alarm Signal.
  8. Change the values of the following parameters:


Parameters

Basic mode

Alarm mode

PNG mode

Pre-Alarm




  • Warning Signal

On

On

On

  • Alarm Ringtone

31 Alarm 5

31 Alarm 5

31 Alarm 55

  • Volume

50

50

50

  • LED blinking

Off

Off

Off

Alarm Signal




  • Alarm Signal

On

On

On

  • Alarm Ringtone

27 Alarm 1

27 Alarm 1

27 Alarm 1

  • Volume

100

100

100

  • LED blinking

Off

Off

Off