FAQ N530 - Register DECT handset via hardware key
Introduction
You can register up to six handsets and six Gigaset repeaters to your base.
Each registered device is assigned an internal number (11-16)
Registering handsets
You must start registration procedure first at base then at handset
Once the registration is complete, the handset returns to idle status. The handset's internal number is shown in the display. If not,repeat the procedure.
You can register Gigaset handsets as follows:
First prepare base for registration
Press and hold the registration button on the base for approx. 3 seconds.
Then start registration at handset
Start to register the handset as described in its user manual.
Of the S700H, for example:
- The handset is not registered to a base:
Press the display key: Register - The handset is already registered to a base:
Menu → Settings → Registration → Register Handset and press OK
Line assignment, wizard
One line is configured:
If you only have one line (SIP account) in your device and you add a new handset then the handset will be assigned incoming and outgoing to this SIP account.
There is no wizard started.
More then one line is configured:
When you add a new handset than you will see the Wizard to assign incoming and outgoing lines.
Incoming by default all lines are selected and can be changed by the user.
Outgoing, by default the first line is selected and can be changed by the user.