FAQ - SUOTA
Valid for: | N530 | N610 | N670 | N770 | N870 | N870E | Embedded Integrator | Virtual Integrator |
Introduction
The Software Update Over The Air (SUOTA) functionality provides the possibility to
- Upgrade DECT handsets via software Over-The-Air.
From software 2.44.0 SUOTA can be enabled via auto-provisioning.
To start SUOTA:
- On the handset go to: Menu - Settings - System - Handset Update
- Click "Update", the device will check the software on the server but you will not get a "New firmware available" message
- Click "Update" a second time and then when new firmware is available, firmware update can be started
- Nx70 base stations and DECT Managers need access to http://suota.gigaset.net/...
- Via SUOTA up to 4 handsets can be simultaneously updated
- Handsets should stay connected to the same base during SUOTA firmware update, roaming during SUOTA is not allowed
Auto-provisioning
How to enable SUOTA via auto-provisioning.
- (See the content of the provisioning file below)
- In the Nx70 web-interface go to: SETTINGS - System - Provisioning and configuration - Autoconfiguration file
- Click on Browse and select the provisioning file you have downloaded
- Click on Upload and then on Start auto configuration
- Now you can start the firmware update on the handset like described above