Instead of the Gigaset external antennas, you can connect also third party antennas. Below are the HUBER+SUHNER antennas.
Gigaset does not sell these antennas !!!
InformationAlways replace both Gigaset antennas with the same external third party antennas, only then the optimum DECT quality is obtained. Some antennas mentioned below have one connector, this means that you need to buy 2 antennas.
- Connect both external antennas to maintain antenna diversity
- The antennas should be of the same type
- Keep at least 30 cm between the antennas
- Place both antennas in the same area. One inside and one outside is not supported
- Antenna cables should be of the same type and length, keep the length as short as possible
- Every meter of cable will be … dB gain loss (depends on the used cable)
| | | |
|---|
| SENCITY® Spot-S Railway Cellular Antenna 1318.17.0015  
| Frequency range (MHz): 1755 - 1910 Input impedance (Ω): 50 V.S.W.R: ≤ 1.5 3dB beam width (v) (°): 70 Gain (dB): 8 Polarization type: Vertical Max. input power (W): 50 DC grounded: no Connector: N-jack female | |
| SENCITY® Spot-S indoor Antenna 1319.26.0027 
| Frequency range (MHz): 1880 - 1930 Input impedance (Ω): 50 3dB beam width (v) (°): 75 Gain (dB): 8 Polarization (°): +/- 45 Max. input power (W): 10 DC grounded: no Connector: 2 x SMA-jack female | |
| SENCITY® Spot-S indoor Antenna 1319.19.0003 
| Frequency range (MHz): 1850 - 1990 Input impedance (Ω): 50 3dB beam width (v) (°): 65 Gain (dB): 8 Polarization type: Vertical Max. input power (W): 10 DC grounded: no Connector: SMA-jack female | |
| SENCITY Omni-L DECT Antenna 1319.17.0121  
| Frequency range (MHz): 1880 - 1930 Input impedance (Ω): 50 V.S.W.R: ≤ 1.5 Gain (dB): 7 Polarization type: Vertical Max. input power (W): 25 DC grounded: yes Connector: N-jack female | |