FAQ Nx70 - Change the role

This DECT platform has one hardware, the device can have the following role.

DECT Base (N870, N770, N670)

• By default, the N870 is a DECT Base.
• By default, the N670/N610 has the role: Integrator + DECT Manager + DECT Base
• A DECT base has mini web-interface
• If the device is configured as DECT Manager, you can reset this device to Base via: Web-interface: Settings - System - Reboot and reset - Reset to Base only.
• Via the hard-key, see: FAQ - Installation
• Via the Power procedure, see: FAQ - Reboot and Reset to factory default

DECT Manager + DECT Base (N870, N670)

• Web-interface: Settings - System - Reboot and reset - Reset to DECT-Manager + Base - dynamic IP.
• Web-interface: Settings - System - Reboot and reset - Reset to DECT-Manager + Base - keep IP.
• Via the hard-key, see: FAQ - Installation
• Via the Power procedure, see: FAQ - Reboot and Reset to factory default

Integrator + DECT Manager + DECT Base (N870, N770, N670, N610, N530)

• Web-interface: Settings - System - Reboot and reset - Reset to All in one - dynamic IP.
• Web-interface: Settings - System - Reboot and reset - Reset to All in one - keep IP.
• Via the hard-key, see: FAQ - Installation
• Via the Power procedure, see: FAQ - Reboot and Reset to factory default

Integrator + DECT Manager (N870, N770, N670)

• Web-interface: Settings - DECT Manager - Administration - Edit DECT manager - change Capacity to Medium.
• Web-interface: Settings - Base stations - Administration - Edit Local Base-station - Activate base station to No.
  
• 
  

DECT Manager (N870, N670)

• Configure the device as DECT Manager + DECT Base via the above procedure.
• Connect to the virtual integrator.
• Via the integrator switch of the DECT base:
  • Web-interface: Settings - DECT Manager - Administration - Edit DECT manager - change Capacity to Medium.
    Web-interface: Settings - Base stations - Administration - Edit Local Base-station - Activate base station to No.